The following content has been automatically translated by close 
魚群探知機作業ハードディスクを検索すると、大漁のトップ上に配置|釣り条
第Sphere Logoは

魚群探知機作業ハードディスクを検索すると大漁のトップ上に配置

専門家著者: マルクドリン | 論文抄録
語数:618語|再生回数:85ビュー(秒)
Fish finders are the best tool to use so you can find and place your boat on top of the fish. All fish finders use sonar to scan the water. A sound wave is sent from the fish finder through the water forming a cone. When an object is detected, the fish finder measures the amount of time between when the sound wave was sent and when it bounced back to the unit and is displayed on the screen.

If the sound wave does not detect anything it hits the bottom. Soft bottoms such as mud will absorb the signal while hard bottoms like rock will reflect a stronger signal and send it back. The small differences in reflections are displayed on the screen and this shows how the bottom is read.

Cone angles are the measurement of the sonar beams in degrees. They are measured at "-10db" which is a way the measurement is consistent from one transducer to another and to accurately represent the capability of the fish finder. Each manufacturer and fish finder model have different cone angles. Humminbird uses an advanced multi-beam system that sends 2, 3 or even 6 sonar beams while most of the other brands use 1 sonar beam.

Here is a quick reference chart for the covered area for a specific cone angle. Example: If you are fishing at a 10 foot depth and a cone angle of 20 degrees, the area on the bottom is 3.5 feet.

20 degrees
-0.35 or roughly 1/3 of depth 24 degrees
-0.42 or roughly 2/5 of depth 30 degrees
-0.53 or roughly 1/2 of depth 40 degrees
-0.72 or roughly 3/4 of depth 50 degrees
-0.93 or roughly 9/10 of depth 60 degrees
-1.15 x depth 70 degrees
-1.4 x depth 73 degrees
-1.48 x depth 80 degrees
-1.68 x depth 90 degrees
-2 x depth 100 degrees
-2.38 x depth 110 degrees
-2.85 x depth

Fish targets will be displayed as a Fish ID symbol or an "arch" which is an unprocessed sonar return, the choice will be yours. Fish ID symbols are determined from a suspended shape being analyzed from the sonar beam to see if it is a fish. If a fish is detected, it is seen on your display as a fish graphic. Arches are displayed from the characteristics of the sonar. Fish that pass through the beam are seen as an arch on the screen. The sensitivity setting of the unit, depth of water, boat speed and location of fish will determine the size of the arch.

Clarity of the water, strong winds or currents can create air pockets and has a lot to do with the integrity of the signal. Small mineral particles such as algae, plankton or other microorganisms can absorb the sound wave instead of reflecting it back to the unit. The action of the waves will also determine the amount of air in the equation and affect the reading.

Transducers are mounted in the water on the inside of the hull, on the transom or on the trolling motor. From a cable connected from the transducer to the fish finder, an electrical signal is taken from the transmitter and turns it into sonar. The transducer should always be mounted straight down and away from motors or any other obstructions.

There are two different types of display screens available. An LCD screen is measured in pixels which shows the sonar information. The more pixels there are the clarity of the image will be better. FSTN displays provide a high contrast image for easy reading that can be seen from anywhere on the boat. They use gray scale technology that offers more detail by showing the sonar image in different shade of gray which can easily distinguish what the bottom is and what the fish are.
Marc Dorin

About the Author/Author Bio

A married father of 2 boys and really enjoy quality family time, like coaching my sons baseball team, like watching hockey, baseball and sometimes football, owner enthusiast of multiple reptiles, driving and working on my Olds 442, love to go fishing when I can. Blog URL: http://fishfinderspot.blogspot.com. Personal URL: www.fishfindergarage.com

Article Source: http://www.ja.articlesphere.com/Article/Fish-Finders-Work-Hard-to-Locate-and-Put-You-on-Top-of-a-Big-Catch/183288

Article Submitted: 2009-03-26 | This Article has been viewed 85 times.

Rate Article

More "Fishing" Related Articles

 
 

以下のリストはより多くの記事""記事のカテゴリー釣りから、上記の記事に関連している。

人々は、上記の資料に"魚ファインダワーキングハードを見つけに関心があり、ビッグキャッチ"にも関連記事を下記のように興味を持っているの先頭へ戻る上に配置:

マグロは大きくておいしい塩水ゲームの魚です。疑う余地がないでは、マグロの種の最も大きなサイズの巨大な取得されて大物釣りのターゲットを確認します。ようこそビンナガ、黒ヒレ、カツオと青のフィンを含むマグロのいくつかの種がある。現在の海岸河口の海域ではマグロをキャッチすることができますほとんどの釣り人のオフショアのマグロを追求する。
ときに何か新しいことを学ぶのであれば、関連する情報は膨大な量の入手に圧倒さを感じるように簡単だ。これは有益な資料では、中心点を釣竿に関連する一般的な集中力を高める必要があります。 1つは、最も信頼できる会社釣竿製造業のペンカンパニーです。
シマノリールの5つの主要なタイプが生成されます。従来のシマノリール魚の多種多様なため、帆の魚から120プラスポンドの巨大なマグロの魚には理想的です。これは、海底の獲物を捕るため、低プロファイルを維持するためbaitcasterリール良好だったほか。
釣り1アメリカの偉大な過去の時代です。しかし、それは多くの場合用意されて楽しいです。この記事は、あなたの前に行うには、トップ5のものが表示されます、あなたの旅を楽しむために釣りに行く。
一般的に、ときに深い海釣り旅行に、どのようにあなたを通って行くには旅行をする上で判断するための1つだろう行くようになります。あなたがチャーター、あるいはまた、"頭の船"と呼ばれ、他のすべての船長の命令を残し当事者ボートで旅をするのが構成できます。
深海釣り多くの人々を楽しんだの活動です。太陽と海と冒険のアドレナリンの活動のような種類の完璧な一日になります。非常に経験豊富な漁師のためしかし、彼らとアドバイスは、もしあなたが本当に、それはあなた日没または2時間2時間後、釣りを開始するために最善だと豊漁を取得したい日の出前であっても。
深海釣りは、あなたとあなたの釣り仲間のための非常に重大な1つのことができる1つの貴重な体験です。しかし、それは多くの場合、最大化されていない活動である。ほとんどの人が何か分からないことが多く自体は釣りよりも深い海釣りの詳細です。これは実際にはこのような旅行を頻繁に最大化されていません悲しいね。
記事のディレクトリホーム すべてのカテゴリ レクリエーションとスポーツ 釣り

あなたが探しているものを見つけることができますか? Google検索してください!
著作権© 2005 - ラリーイム、シンガポール-記事検索エンジンディレクトリArticleSphere.com™で
すべての権利予約ワールドワイド。すべての商標およびサービスマークは
それぞれの所有者の財産です。

アフリカーンス語 アルバニア語 アラビア語 ベラルーシ語 ブルガリア語 カタロニア語 中国語(簡体字) 中国語(繁体字) クロアチア語 チェコ語 デンマーク語 ドイツ語 英語 エストニア語 フィリピノ語 フィンランド語 フランス語 ガリシア語 ギリシャ語 ヘブライ語 ヒンディー語 ハンガリー語 アイスランド語 インドネシア語 アイルランド語 イタリア語 日本語 韓国語 ラトビア語 リトアニア語 マケドニア語 マレー語 マルタ語 オランダ語 ノルウェー語 ペルシア語 ポーランド語 ポルトガル語 ルーマニア語 ロシア語 セルビア語 スロバキア語 スロベニア語 スペイン語 スワヒリ語 スウェーデン語 タイ トルコ語 ウクライナ語 ベトナム語 ウェールズ語 イディッシュ語